Solutions for connected, automated and wireless products.
Six solution areas where Thartek combines hardware, firmware, wireless design and software into one working system. Pick the domain closest to your need and we will scope the rest with you.
Six solution areas, one engineering team
Each solution is built from the same disciplines: schematic and PCB design, firmware, wireless, mechanical and software, so there are no hand-offs between vendors.
IoT & Embedded Systems
Connected devices engineered for battery life, field reliability and clean cloud integration.
ExploreIndustrial Automation
Monitoring and control electronics that fit into real plants, panels and legacy machines.
ExploreRF & Wireless Communication
Radio links that work in the real environment: steel sheds, farms, vehicles and long outdoor runs.
ExploreHVAC Control
Sensing and control electronics for comfort, cold storage and process cooling.
ExploreDrone Surveillance
Airborne payload and ground-station electronics for inspection and monitoring missions.
ExploreHome Automation
Reliable smart-home and building controls that keep working when the internet does not.
ExploreIoT & Embedded Systems
Connected devices engineered for battery life, field reliability and clean cloud integration.
We design the complete device: sensing front-end, ultra-low-power MCU hardware, wireless connectivity, firmware, gateway and cloud or dashboard link. Our focus is devices that run for years in dust, heat and patchy-network conditions, not lab demos.
Key features & capabilities
- Ultra-low-power architecture: microamp sleep states, duty-cycled radios, energy budgeting
- BLE, Wi-Fi, LoRa and 4G / NB-IoT connectivity options
- Secure OTA firmware updates, watchdogs and brown-out handling
- MQTT / HTTPS cloud integration with TLS and per-device credentials
- Solar and battery-powered designs (coin cell, Li-SOCl2, Li-ion, LiFePO4)
Typical use cases
- Solar plant monitoring
- Cold-chain and warehouse sensing
- Smart metering and energy IoT
- Rural fleet and asset tracking
- Battery energy storage telemetry
Industrial Automation
Monitoring and control electronics that fit into real plants, panels and legacy machines.
We build controllers, remote I/O and gateways that connect existing machines to modern dashboards without replacing them. Designs target industrial environments: surge, noise, wide supply ranges and long service life.
Key features & capabilities
- Modbus RTU / TCP, RS-485 and CAN connectivity to PLCs, drives and meters
- Digital and analogue I/O: relay outputs, isolated inputs, 4-20 mA and 0-10 V
- Retrofit gateways that add remote monitoring to existing machines
- Surge, reverse-polarity and EMI protection designed in from the schematic
- Local data logging with store-and-forward when the network drops
Typical use cases
- Pump and motor monitoring for mills and processing units
- Energy metering and power-quality logging
- Machine uptime and production counting
- Remote start/stop and interlock panels
- Rural industry IoT retrofits
RF & Wireless Communication
Radio links that work in the real environment: steel sheds, farms, vehicles and long outdoor runs.
We select the right radio for the range, power and data-rate you need, then design the antenna, matching network and layout so the link budget holds up in the field, not only on the bench.
Key features & capabilities
- Radio selection: BLE 5, Wi-Fi, sub-GHz (LoRa/FSK), cellular IoT, GNSS
- Antenna selection, keep-out planning and Pi-network matching
- Link-budget calculation and range testing in target environments
- Low-power radio duty-cycling and protocol efficiency tuning
- RF-aware PCB layout: ground planes, transmission lines, filtering
Typical use cases
- Long-range sensor networks across farms and plants
- BLE sensor-to-gateway systems
- Vehicle tracking with GNSS + cellular
- Wireless remote controls and telemetry links
- Gateway design for multi-sensor sites
HVAC Control
Sensing and control electronics for comfort, cold storage and process cooling.
We develop controllers and monitoring nodes for heating, ventilation, air-conditioning and refrigeration systems: stable closed-loop control, reliable sensing and remote visibility into temperature, humidity and equipment status.
Key features & capabilities
- Temperature, humidity, pressure and air-quality sensing with calibration support
- PID and hysteresis control for compressors, fans, dampers and valves
- Variable-speed drive interfacing over Modbus or analogue signals
- Alarm logic, setpoint scheduling and local display options
- Remote monitoring and energy logging over MQTT or Modbus gateways
Typical use cases
- Cold rooms and cold-chain monitoring
- Chiller and air-handler control
- Ventilation control for poultry, dairy and greenhouses
- Server-room and clean-room environment monitoring
- Energy-use tracking for HVAC plant
Drone Surveillance
Airborne payload and ground-station electronics for inspection and monitoring missions.
We engineer the electronics around the airframe: payload controllers, telemetry and data links, power distribution and ground-side dashboards. All operations are intended to follow the applicable drone regulations in India (Drone Rules, 2021).
Key features & capabilities
- Payload controller boards for cameras, thermal sensors and environmental sensors
- Telemetry and data-link integration with flight controllers
- Power-distribution boards with regulation, protection and low-weight layout
- Geotagged data capture and ground-station dashboards
- Vibration-tolerant enclosure and mounting design with 3D printing
Typical use cases
- Solar plant and transmission-line inspection
- Crop and field monitoring
- Perimeter and site surveillance
- Infrastructure and construction progress capture
- Post-incident area assessment
Home Automation
Reliable smart-home and building controls that keep working when the internet does not.
We design switching, dimming, sensing and control modules that work locally first and sync to an app or cloud second. Devices integrate with common smart-home platforms through standard MQTT, so customers are never locked in.
Key features & capabilities
- Wi-Fi and BLE relay, dimmer and sensor modules with local fallback control
- Mains-safe design: isolation, creepage, fusing and surge protection
- MQTT integration with open platforms such as Home Assistant
- Mobile-app onboarding and scene/schedule control
- Energy monitoring and appliance-level metering
Typical use cases
- Smart lighting and fan control
- Water-tank and pump automation
- Security and access sensors
- Energy-monitoring plugs and panels
- Retrofit switch modules for existing wiring
From a coin-cell sensor to a live dashboard
Our IoT, HVAC, industrial and home-automation solutions share one proven data path. Walk through a complete BLE sensor to MQTT to dashboard example, with topics, QoS, payloads and a battery-life calculator.
BLE sensor device
Years of battery life through low-power advertising
BLE gateway
Ethernet or Wi-Fi uplink with local buffering
MQTT broker and dashboards
Live charts, gauges and alerts on web and mobile
Not sure which solution fits?
Describe the problem, not the product. We will recommend an architecture and a first step.
