Pavoorchatram, Tenkasi, Tamil Nadu 93459 14230  |  info@thartekinnovations.in
Embedded & IoT

Embedded & IoT Product Rapid Prototyping

From idea to a working device on your desk, fast. Functional IoT and embedded prototypes that prove your concept (sensing, control, connectivity and power) before you commit to custom tooling.

Overview

Value to your product

We shorten the distance between an idea and a device you can hold, test with real users and show to investors, without the cost structure of a metro engineering firm.

A prototype is only useful if it answers a question. We start by identifying the one or two technical risks that could kill your product (battery life, radio range in a steel shed, sensor accuracy outdoors) and build the quickest honest experiment that answers them.

Working from Tenkasi lets us keep our overheads low and put senior engineering time directly on your build. Rural and semi-urban deployment conditions (dust, heat, voltage swings, patchy network) are tested near where many products actually end up.

Capabilities

Tools, technologies and processes

Hardware platforms

  • ESP32 / ESP32-S3 / C3
  • STM32 (F0/F1/F4/L4/G0)
  • Nordic nRF52 / nRF53
  • Raspberry Pi RP2040
  • Raspberry Pi / Linux SBCs for gateways

Connectivity

  • BLE 5, Wi-Fi
  • LoRa / LoRaWAN
  • 2G/4G LTE Cat-1 / Cat-M / NB-IoT modules
  • GNSS (GPS/NavIC-capable modules)
  • RS-485 / Modbus, CAN, I2C, SPI, UART

Sensing & actuation

  • Current/voltage/energy metering
  • Temperature, humidity, pressure, gas
  • IMU, vibration, tilt
  • Relays, SSRs, motor drivers, 4-20 mA / 0-10 V I/O

Process

  • Risk-first experiment plan
  • Breadboard / dev-board PoC
  • Custom 1st-spin prototype PCB
  • Field trial with logged data
How it works

Our process

  1. Scope the risk

    Define what must be proven and how success is measured.

  2. Build the experiment

    Dev-board or custom prototype with instrumented firmware.

  3. Test in realistic conditions

    Bench first, then field or site trial.

  4. Decide with data

    You get a go / adjust / stop recommendation.

Deliverables

What you receive

  • Working prototype with source code
  • Block diagram and wiring/pin map
  • Test log with measured results
  • Recommendation: proceed, change, or stop
  • Cost-at-volume estimate (indicative)
Target clients

Who this service is for

Startups

Validate your idea before raising or tooling.

Industrial

Pilot monitoring, metering or control on an existing machine or plant.

Consumer brands

Build a demo unit and early-user samples for a smart-product concept.

Service interconnection

Where Embedded & IoT Prototyping fits in the product journey

Stages where this service contributes are outlined in yellow. Select any stage for details.

Related services

Often combined with

Embedded & IoT

Product Research & Development

Architecture, component strategy, power and cost engineering that convert a proof of concept into a design you can build, certify and support.

Technical details about Product R&D
Embedded & IoT

Embedded Firmware Development

Production-oriented firmware for ARM Cortex-M, ESP32 and Nordic platforms, with low-power design, OTA updates and robust connectivity.

Technical details about Embedded Firmware
Electronics Manufacturing

Schematic & PCB Layout

Professional schematic capture and PCB layout for 2 to multi-layer boards, with DFM checks aimed at your fabrication and assembly route.

Technical details about Schematic & PCB Layout

Ready to start with Embedded & IoT Prototyping?

Share your requirement and we will respond with scope, timeline and cost. Want to build these products with us? See our open roles.